Kushaiguda, Hyderabad, Telangana
GST No. 36AACFB1513D1Z8
Call 08048973764 77% Response Rate
Product Brochure
Model Number | BTL-BCD-90 |
Drilling Depth | <50 meters |
Power Source | Hydraulic, Pneumatic |
Hole Diameter | 100-200 mm |
Usage | Ore Extraction, Mining |
Automation Grade | Fully Automatic |
Condition | New |
Air Compressor (psi) | 475 |
Capacity (Feet) | 100 Feet |
Brand | BTL-BCD-90 |
Capacity | 41/2 to 6 bore hole to a depth of 100mtr. |
Max torque | 240 Kgmts |
Hydraulic Jacks | 4 no. of 100 * 63 * 610mm stroke (Stabilizers) |
Break Out wrench | 80mm x 300mm Stroke (to open the drill joints) |
Water Injection Pump | 36 Lpm at 450 psi |
Hydraulic Pumps used | Gear type / Van Type |
Maximum operating pressure | 180 Kg/cm2 |
Hydraulic oil Tank Capacity | 300 Ltrs |
Mast | Suitable to handle 10ft. Rods |
Mast Construction | Channel structure |
Centralizer opening | 203 mm |
Pull up Force | 4700 kg |
Pull Down Force | 2400 kg |
Pull up Speed | 39 Mts/ min |
Rotation Speed | 0 to 100 rpm |
Additional Information:
View Complete details
Minimum Order Quantity: 100 Piece
Product Brochure
Usage/Application | Mining , Water well drilling & Auger Piling |
Drilling Rig Type | Land Based Drilling Rigs |
Size | Drilling Dia 152 mm to 600 mm up to 1000 mm |
Capacity | Drilling Depth 150 meters |
Type | Rotary Drill, Pillar Drill, DTH Cum Rotary, Hammer Drill |
Hole Diameter | 300mm, 150-200 mm |
Drill Depth(mm) | 50 Meters |
Brand | New Holland / Johndeere |
Drilling Depth | 100-200 meters |
Power Source | Pneumatic, Hydraulic |
Automatic Grade | Semi Automatic |
Air Compressor | ELGI/ Atlas Copco 600 cfm -200 psi & ELGI/Atlas Copco 1100cfm-300psi |
Model.no | Beaver-TMR-150 |
Material | HSS |
Condition | New |
Beaver TMR-150 model, Tractor mounted Top drive DTH cum ROTARY drill rig is capable of drilling in different formations such as medium to Hard Rock by DTH method, Unconsolidated / alluvial formations using Air/Water flush by Rotary Method, up to a depth of 50 Meters.(Under favorable drilling conditions).
Application: solar project
Additional Information:
View Complete details
Minimum Order Quantity: 100 Unit
Product Brochure
Drilling Depth | 30mts (100ft) |
Drilling Method | DTH |
Drilling Diameter | 4.5" to 6.5" |
Drilling Diameter for Solar Project | 12.0" |
Excavator for mounting | Rig is mounted on 20ton excavator |
Prime Mover | The Entire Hydraulic Rig system will be Powered by using same Prime mover of Excavator and Separat |
Mast | Suitable to handle Drill Rod of length 20ft. (6mtr) |
EXCAVATOR MOUNTED BLAST HOLE DRILL is a versatile hydraulic drill rig, mounted on a TATA Hitachi EX 200 LC Excavator (or equivalent) with onboard compressor, suitable for blast hole drilling in mines, can be easily accessible to drill on bench as well as below the ground level, construction works, canal works and solar projects.
Our Excavator Mounted Blast hole drill is a perfect high-performance solution for a wide variety of drilling applications and can operate in all Terrain conditions.
Additional Information:
View Complete details
Drilling Depth | <50 meters |
Power Source | Electric |
Usage | Under Ground Mining |
Pull up Speed | 32 Mtrs/min |
Capacity of Drilling | 4.5" to 6" DTH Drilling to a depth of 60 mtrs. (200 feet) |
Type of Drilling | DTH |
Prime mover of the hydraulic pumps | Electrical Engine / Diesel Deck Engine |
Hydraulic Pump used | Gear Type / Vane Pump |
Maximum operating pressure | 220 Kg/cm2 |
Hydraulic oil tank capacity | 250 Ltrs |
Mast Construction | Channel Structure |
Mast | Suitable to handle 4.5ft. / 5ft. pipes |
Centralizer opening | 270 mm |
Pull up Force | 8000kg |
Max Torque | 280 Kg-m |
Rotation Speed | 0-100 Rpm |
Hydraulic Jacks | 4 Nos. of 100 x 63 x 610 Stroke (Stabilizers) |
Pull down Force | 4500 Kgs |
Break out wrench | 70 x 300 Stroke (to open the drill joints) |
Water Injection Pump | 36 LPM @ 40 Bar |
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Brand | Beaver-em-30 |
Drilling Rig Type | Slim Hole Drilling Rig |
Model Number | Beaver-em-30 |
Capacity | 50-150 feet |
Drilling Depth | <50 meters, 50-100 meters |
Hole Diameter | 100-200 mm |
Power Source | Hydraulic, Pneumatic |
Condition | New |
Usage | Ore Extraction, Mining |
Model | BTL-EM-30 |
Automatic Grade | Semi-Automatic |
Automation Grade | Semi Automatic |
Drilling Depth (m) | 30 |
Truck Mounting | No |
Compressor (Cfm) | 550 |
Air Compressor (Cfm) | 550 |
Air Compressor (psi) | 200 - 300 |
Capacity (Feet) | 100Feet |
Mud Pump Flow (lpm) | 56 LPM |
Drill Rod length | 6mts |
EXCAVATOR MOUNTED BLAST HOLE DRILL is a versatile hydraulic drill rig, mounted on a TATA Hitachi EX 200 LC Excavator (or equivalent) with onboard compressor, suitable for blast hole drilling in mines, can be easily accessible to drill on bench as well as below the ground level, construction works, canal works and solar projects.
Our Excavator Mounted Blast hole drill is a perfect high-performance solution for a wide variety of drilling applications and can operate in all Terrain conditions.
Additional Information:
View Complete details
Minimum Order Quantity: 10 Unit
Size | 2-3 inch |
Type | Drill Point Drills - Straight Shank |
Color | BLue |
Material | Carbide Tipped |
Material for Construction | Stainless steel |
Additional Information:
View Complete details