Beaver Engineering CorporationBeaver Engineering Corporation

Site Search:


Home Know Us Our Product Range Contact Us

Our Product Range

Water Well Drilling Rigs

Heavy Duty Water Well Drilling Rig

Water Well Drill Rig

Automatic Rod Changer Drilling Rig

DTHR 1500 Rotary Cum DTH Drill Rig

Truck Mounted Drill Rig

Rotary DTH Drill Rig

Tractor Mounted Water Well Drill Rig

Drilling Rig Mounted On Trailer

Pickup Mounted Water Well Drill Rig

Portable Water Well Drilling Rigs

Mining Drill Rigs

Core Drilling Rigs

DTH Hammers

Button Bits

Welded Drill Rods


Water Well Drilling Rigs

Share: FacebookTwitterStumble

Leading Manufacturer and Exporter of Water Well Drilling Rigs such as Heavy Duty Water Well Drilling Rig, Water Well Drill Rig, Automatic Rod Changer Drilling Rig, DTHR 1500 Rotary Cum DTH Drill Rig, Truck Mounted Drill Rig, Rotary DTH Drill Rig and many more items from Hyderabad.

Heavy Duty Water Well Drilling Rig   hot

Heavy Duty Water Well Drilling Rig



BEAVER BTHR-500 Model, Truck Mounted Hydraulically Operated Heavy Duty Water Well Drilling Rig can capable of drilling from 6” to 10” Dia. Bore Holes in hard rock by DTH method, upto 14½” Bore Holes in Unconsolidated / alluvial formations using water / foam flush by Rotary method up to a depth of 500 Meters (1650 Ft.) under favorable Drilling Conditions. The hydraulic pumps shall be powered by either same truck engine through PTO or by a separate diesel drive deck engine. It is a two truck version drilling rig.

Key Specification:

Capacity of Drilling

10” Drilling to a depth of 500 mtrs. (1640 feets)

Prime mover of the hydraulic pumps

Truck Engine / Deck Engine of suitable capacity

Hydraulic Pumps used

Radial Piston Pumps & Gear Pump

Maximum operating pressure

230 Bar

Hydraulic oil tank capacity

1000 Ltrs.

Mast Construction

Tubular Structure

Mast

Suitable to handle 20ft. pipes

Centralizer opening

20”

Pull-up Force

30000 Kgs

Pull-down Force

18630 Kgs

Pull-up Speed

36 Mtrs/min

Max. Torque in Series Circuit

750 Kg-m @ 0-120 rpm

Max. Torque in Parallel Circuit

1500 Kg-m @ 0-60 rpm

Hydraulic Jacks (Stabilizers)

4 Nos. of Box Type Ø125x70x610 Stroke

Break-out wrench (to open the drill joints)

Ø125x350 Stroke

Water Injection Pump

80 LPM @ 40 Bar

Suitable Mud Pump

10”x7½”. Driven by either a separate engine or with Hydraulic Motor.

Air Compressor

1200cfm, 330psi. or 1500cfm, 400psi.

Water Well Drill Rig   hot

Water Well Drill Rig



Water Well Drill Rig offered by us come with drilling capacity of 6" to 8' bore hole which can be drilled to a depth of 1500 ft. With water well type of drilling action, these make use of truck engine / deck engines as prime movers of hydraulic pumps which are available in gear type/piston type finish. This allows these drilling rigs to achieve maximum operating pressures of 230bar. Further, the hydraulic oil tank capacity of 600ltrs, centralizer opening of 270mm, pull up force of 13500kg and pull down force of 6700kg, these are best drill rigs available in its capacity.

Specifications:

Capacity of drilling 6” to 8” bore hole to a depth of 1500 ft. Under favorable driling conditions
Type of drilling Water Well
Prime mover od the hydraulic pumps used Truck engine / deck engine
Hydraulic pumps used Gear type/ piston type
Maximum operating pressure 270bar
Hydraulic oil tank capacity 600ltrs
Mast Suitable to handle 20ft. Rod
Mast construction Box type structure
Centralizer opening 270mm
Pull up force 13500kg
Pull down force 6700kg
Pull up speed 63mts/ min
Rotation speed 0 to 100rpm
Max. torque 570kgmts
Hydraulic jacks (stabilizers) Box type jacks 4 no. (125*63*610mm stroke)
Break out wrench (to open the drill joints) 80mm*300mm stroke
Water injection pump 80lpm at 450psi
Carrier Truck / Skid
Accessories/ optional attachments Welding set, winch with jib and boom arrangement on the top of the mast.

Automatic Rod Changer Drilling Rig

Automatic Rod Changer Drilling Rig



BEAVER introduced most advanced drilling technology for the first time; it is truly possible for one man can effectively operate the entire drilling operation. It is a fully automatic rod handling drilling rig. The main features of this concept are to reduce the Man Power and improves the efficiency of rod feeding and removal time in order to save the operational cost. The drilling operator can continue the drilling operation while this system prepares to position the next drill rod automatically, so that the idle time of the machine is almost reduced. We can save atleast 40-50% of the operational and maintenance cost by this machine compare to normal drilling machine. No need of any technical person to operate. The normal drilling operator can operate effectively so that it is more reliable and user friendly.

Specifications:

Capacity of drilling 6” to 8” bore hole to a depth of 1500 ft. Under favorable driling conditions
Type of drilling Water Well
Prime mover od the hydraulic pumps used Truck engine / deck engine
Hydraulic pumps used Gear type/ piston type
Maximum operating pressure 270bar
Hydraulic oil tank capacity 600ltrs
Mast Suitable to handle 15ft. / 18.5ft / 20ft Drill Rods
Mast construction Channel / Box type structure
Centralizer opening 305mm
Pull up force 11800kg
Pull down force 6000kg
Pull up speed 35mts/ min
Rotation speed 0 to 100rpm
Max. torque 280 kgmts
Hydraulic jacks (stabilizers) Box type jacks 4 no.
Rod Changer
Operated by Auto, Remote & Manual
Water injection pump 80lpm at 450psi
Carrier Truck / Skid
Accessories/ optional attachments Welding set, winch with jib and boom arrangement on the top of the mast.

DTHR 1500 Rotary Cum DTH Drill Rig   hot

DTHR 1500 Rotary Cum DTH Drill Rig



Technical Specifications:

 

Capacity of drilling 6” to 8” bore hole to a depth of 1500 ft. Under favorable driling conditions
Type of drilling DTH cum Rotary
Prime mover od the hydraulic pumps used Truck engine / deck engine
Hydraulic pumps used Gear type/ piston type
Maximum operating pressure 270bar
Hydraulic oil tank capacity 600ltrs
Mast Suitable to handle 20ft. Rod
Mast construction Box type structure
Centralizer opening 270mm
Pull up force 13500kg
Pull down force 6700kg
Pull up speed 63mts/ min
Rotation speed 0 to 100rpm
Max. torque 570kgmts
Hydraulic jacks (stabilizers) Box type jacks 4 no. (125*63*610mm stroke)
Break out wrench (to open the drill joints) 80mm*300mm stroke
Water injection pump 36lpm at 450psi
Mud pump Hydraulically operated mud pump is mounted on the rig
Carrier Truck / Skid


Truck Mounted Drill Rig

Truck Mounted Drill Rig



Truck Mounted Drill Rig offered by us come with drilling capacity of 6" to 8' bore hole which can be drilled to a depth of 1000 ft. With water well type of drilling action, these make use of truck engine / deck engines as prime movers of hydraulic pumps which are available in gear type/piston type finish. This allows these drilling rigs to achieve maximum operating pressures of 230bar. Further, the hydraulic oil tank capacity of 600ltrs, centralizer opening of 270mm, pull up force of 9400kg and pull down force of 5500kg, these are best drill rigs available in its capacity.

Specifications:


Capacity of drilling 6" to 8' bore hole to a depth of 1000 ft. Under favorable drilling conditions.
Type of drilling
Water well
Prime mover of the Hydraulic pumps used Truck engine / deck engine
Hydraulic pumps used Gear type/piston type
Maximum operating pressure 230bar
Hydraulic oil tank capacity 600ltrs
Mast Suitable to handle 20ft. Rod
Mast construction Channel structure
Centralizer opening 270mm
Pull up force 9400kg
Pull down force 5500kg
Pull up speed 65 mts/min
Rotation speed 0 to 90rpm
Max. torque 324kgmts
Hydraulic jacks / stabilizers) 4no. of 125x63x610mm stroke (optional: box type jacks)
Break out wrench (to open the drill joints) 80mmx300mm stroke
Water injection 36 lpm at 450 psi
Rod changer Manually operated single rod changer
Accessories / optional attachments Welding set, winch with jib and boom arrangement on the top of the mast.

Rotary DTH Drill Rig

Rotary DTH Drill Rig



Technical Specifications:

 

Capacity of drilling6" to 8' bore hole to a depth of 1000 ft. Under favorable drilling conditions.
Type of drilling
Rotary cum dth
Prime mover of the Hydraulic pumps usedTruck engine / deck engine
Hydraulic pumps usedGear type/piston type
Maximum operating pressure230bar
Hydraulic oil tank capacity600ltrs
MastSuitable to handle 20ft. Rod
Mast constructionChannel structure
Centralizer opening270mm
Pull up force9400kg
Pull down force5500kg
Pull up speed65 mts/min
Rotation speed0 to 90rpm
Max. torque324kgmts
Hydraulic jacks / stabilizers)4no. of 125x63x610mm stroke (optional: box type jacks)
Break out wrench (to open the drill joints)80mmx300mm stroke
Water injection36 lpm at 450 psi
Rod changerManually operated single rod changer
Mud Pump
Hydraulically operated 6x6 Capacity Mud Pump

Tractor Mounted Water Well Drill Rig

Tractor Mounted Water Well Drill Rig



Tractor Mounted Drill Rig made available by us comes with drilling capacity of 41/2” where these can drill 6” bore hole to depth of 100mtr. With tractor engines as prime movers of hydraulic pumps, these are of Gear type/ Van Type with maximum operating pressures of 180 Kg/cm2 and hydraulic oil tank capacity of 300 Ltrs. With the available mast suitable to handle 10ft. rods, the channel structure of the rods with centralizer opening of 203mm, pull up force of 4700kg and pull down force of 2400kg makes these best in its class drill rigs.

Specifications:

Pull up Speed39Mts/ min
Rotation Speed0 to 100rpm
Max. torque240Kgmts
Hydraulic Jacks (Stabilizers)4 no. of 100*63*610mm stroke
Break Out wrench (to open the drill joints)80mm*300mm Stroke
Water Injection Pump36Lpm at 450psi

Drilling Rig Mounted On Trailer

Drilling Rig Mounted On Trailer



Drilling Rig Mounted on Trailer made available by us come in drilling capacities of 41/2” to 6” bore hole to depth of 500 ft. With prime mover of hydraulic pumps used being deck engines, the hydraulic pumps used include gear type/ van type and have maximum operating pressure of 160bar. Further, these have hydraulic oil tank capacity of 400 ltrs with mast that is suitable to handle 5 ft. or 10ft. rods. These also have centralizer opening of 250mm with rotation speed of 0 to 90RPM.

Specifications:


Capacity of drilling41/2” to 6” bore hole to a depth of 500ft. Under favorable drilling conditions
Prime mover os the hydraulic pumps usedDeck engine
Hydraulic pumps usedGear type/ van type
Maximum operating pressure160 bar
Hydraulic oil tank capacity400 LTRS
MastSuitable to handle 5 ft. Or 10ft. Rod
Mast constructionChannel structure
Centralizer opening250 MM
Pull up force4100 KG
Pull down force2600 KG
Pull up speed38 MTS/ min
Rotation speed0 to 90 RPM
Max. torque220 KGMTS
Hydraulic jacks (stabilizers)4 no. Of 100*63*610mm stroke
Break out wrench (to open the drill joints)80mm*300mm stroke
Water injection pump36I PM at 450 PSI
Rod changerManually operated single rod changer
Accessories/ optional attachmentsWelding set, winch with jib and boom arrangement on the top of the mast.

Pickup Mounted Water Well Drill Rig

Pickup Mounted Water Well Drill Rig



Truck Mounted Water Well Drill Rig made available by us come in drilling capacities of 41/2” to drill a 6” bore hole to depth of 650ft. With Truck Engine/ Deck engine, hydraulic pumps are used as prime movers with hydraulic pumps used being of Gear type/ Van Type. These can work at maximum operating pressures of 160Bar and have hydraulic oil tank capacity of 400 Ltrs. Further, these have a centralizer opening of 250mm with pull up force of 6500kg and pull down force of 4400kg.

Specifications:


Capacity of drilling41/2” to 6” bore hole to a depth of 650ft. Under favorable drilling conditions
Prime mover OS the hydraulic Pumps usedTruck Engine/ Deck engine
Hydraulic Pumps usedGear type/ Van Type
Maximum operating pressure160 Bar
Hydraulic oil Tank Capacity400 Ltrs
MastSuitable to handle 10ft. Rod
Mast ConstructionChannel structure
Centralizer opening250mm
Pull up Force6500kg
Pull Down Force4400kg
Pull up Speed24Mts/ min
Rotation Speed0 to 100rpm
Max. torque220Kgmts
Hydraulic Jacks (Stabilizers)4 no. of 100*63*610mm stroke
Break Out wrench (to open the drill joints)80mm*300mm Stroke
Water Injection Pump36Lpm at 450psi
Mud pump
Hydraulically operated mud pump is mounted on the rig
Accessories/ Optional AttachmentsWelding set, winch with jib and boom arrangement on the top of the mast.

Contact Us

Beaver Engineering Corporation
Mr. Dinesh Reddy (Director)
Unit No. 9- B, No. 10 A & B, Electronic Complex, Kushaiguda
Hyderabad - 500062, Telangana, India

Contact via E-mail


Home  |  Know Us  |  Our Product Range   |  Site Map  |  Contact Us   |  Mobile Site

Member IndiaMART.com © Beaver Engineering Corporation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited